Printer FriendlyEmail Article Link

Getting Started with Spirent TestCenter (5.11)

Summary

Getting Started with Spirent TestCenter provides hardware set up, software installation, and licensing instructions for customers who are receiving and installing a new Spirent TestCenter system or new hardware.

Summary of Installation Procedures:
Procedure 1: Check System Requirements
Procedure 2: Verify Contents of Shipment
Procedure 3: Install Spirent TestCenter Software
Procedure 4: Chassis and Appliance Firmware Support
Procedure 5: Perform Cable Connections
Procedure 6: Install the Ferrite Block
Procedure 7: Connect Power
Procedure 8: Set the Chassis IP Address
Procedure 9: Confirm the Ethernet Link
Procedure 10: Use Authenticate mode (optional)
Procedure 11: Obtain Your License Key
Procedure 12: Connect to a DUT/SUT
Appendix Install and Configure a Spirent LabServer
Appendix Spirent TestCenter Upgrade/Downgrade Procedures

identify chassis controller version, Equipment View window,  Authenticate Mode, license key, EMI guidelines, Install Spirent TestCenter Software, 32-bit and 64-bit applications, Cable Connections, chassis front panel, chassis back panel, chassis power, ferrite block, AC power, DC power, SPT-C50, Changing the Default IP Address, Setting the IP Address, using SSH, Netmask and Gateway Values, License Entitlement ID (LEI), Configure  Run Tests

Attachments
Attachment Description
Getting Started with Spirent TestCenter (5.11)