If you don’t know the systems IP address, you can change it using the serial connection with Hyperterm. (Note: It is not possible to use the GUI or configure your environment with this connection type.)
Please see instructions below. For more detailed information on connecting to the Abacus, please refer to the “TCP-IP Installation” document located in your Abacus manual folder (example: C:\Abacus 5000\6.20\MANUAL).
• Bits per second: 115200
• Data bits: 8 (the normal default value)
• Parity: None (the normal default value)
• Stop Bits: 1 (the normal default value)
• Flow control: None