Customer Service Center
Doc ID: FAQ10241
Email Article Link
Spirent TestCenter : How to verify Data Integrity check function?
This could be done in different ways
Set the frame payload fill to PRBS
Analyze the received PRBS error counters per port or streamblock to measure the ratio of data corruption by DUT.
Turn off the Spirent signature and set the payload to all "A"s.
Analyze and see if all "A"s are received via capture at receiving port.
If the frame sizes are small enough, use triggers or Analyzer filters to check RX data
Add a TCP or UDP header and monitor their checksum.
Product : Spirent TestCenter,Windows GUI,Spirent TestCenter