Customer Service Center

Note: Firmware Version must be at least 0.99.205.18449/14992/15683/50A for the cVu120g.
To check firmware version: Go to https://<device_ip>/version

1. Login to the cVu HTTP GUI with any admin user.
2. Click Settings.
3. Change the delay compensation to the desired value. If the cable_delay_compensation parameter is not present, add it.
   This example sets it for 10 nanoseconds, adjust as needed:
        # pps delay compensation in nanoseconds
        cable_delay_compensation 10
4. Click Save Settings and then click Reload.