Printer FriendlyEmail Article Link

How do I ensure the correct measurement is selected for Pass/Fail criteria on Landslide?

Answer

 

    1. The Pass/Fail criteria allow setting up the operational measurements to be used to indicate when a test passes or fails.
    2. Before configuring the Pass/Fail criteria, run the test and use the test session reports tab to monitor the operation measurements of interest.
    3. Once you have an idea of the measurements and criteria you will apply, refer to the Landslide Online Getting Started > Testing Overview > About Pass/Fail Criteria and click on the Example criteria link for recommended criteria methodologies.
    4. Note that the first test run will also allow you to ensure the measurements to be used as criteria are applicable to the test configured.

Product : Landslide Client,Landslide