Customer Service Center
Spirent KB Article
Doc ID: FAQ11190
Email Article Link
Spirent TestCenter: RSVP-TE Tunnels would not come up when DUT is HE and STC is TE.
Seen on the MX 10/40/100G modules when DUT is HE and STC is TE.
This test configuration causes OSPF to fail in the creation of its Opaque LSA.
The missing LSA in the DUT routing table stops RSVP tunnels from coming up.
when using ISIS as the IGP (Interior Gateway Protocol)
For the MX issue
This is a known issue and was addressed in v3.90.
TE Parameters are required for DUT to use to create the proper Path
These parameters are in the main ISIS Device grid in the TestCenter config
The DUT also need to have MPLS traffic engineering configured under the ISIS router
Product : RSVP,Windows GUI,MPLS,ISIS