Customer Service Center
Home
Knowledge Base
Contact Support
License Activation
|
Contact Support
|
License Activation
|
Spirent KB Article
Doc ID: FAQ12604
Printer Friendly
Email Article Link
Positioning Appliction: Why do I get the message "Error: 'Cannot find h/w configuration <config name>. Using the first in the h/w configuration list which is <config name>'"?
Environment/Versions
PosApp (SimGEN / SimREPLAYplus / SimREPLAY)
Answer
Hardware (h/w) configuration (config) listings are held in a file called
sig_gen.txt
, stored in the PosApp directory
This message informs you that PosApp cannot find the h/w config that was used when you last started the software
Instead, PosApp will select the first config in the current list.
This can happen if the sig_gen.txt file has been
Removed / Deleted
Replaced
Modified
The example in Figure 1 explains that
PosApp cannot find a h/w config called "GSS7700#8888" in the current sig_gen.txt file
Instead the first h/w config from the current sig_gen.txt file will be used, which is called "6700 3 L1".
WHAT TO DO
If you know the sig_gen.txt file has changed and you are confident it is the one you want to use
a) Simpy acknowledge the message and continue working
b) If necessary/applicable, use menu [Tools-->Change hardware configuration] to select the h/w config you want to use
If you know the sig_gen.txt file has changed but are uncertain if it's the correct one -OR- you didn't know the sig_gen.txt file has changed
a) Acknowledge the message and allow PosApp to start
b) Go to menu [Tools-->Change hardware configuration]
c) Check the available list of h/w configs
d) If these match your expectation then continue working as normal
e) If these do not match your expectation then either
i) Locate the correct sig_gen.txt file for your system and copy this back to the PosApp directory
ii) Contact Spirent Global Services to request a copy of your sig_gen.txt (see below)
CONTACTING SPIRENT GLOBAL SERVICES
Use the "Submit a Service Request" link on the right-hand side of the Knowledge Base screen
Confirm the model and serial number of the simulator(s) you are working with
Explain that you have experienced the warning message detailed on this article and require a copy of your sig_gen.txt file
Version
4.0
Publish Date
2014-07-29
Categories
Product : SimREPLAYplus,SimREPLAY,SimGEN,PosApp
Related Articles