Printer FriendlyEmail Article Link

Spirent TestCenter: On which hardware and application release is Port Grouping (LAG) supported?

Environment/Versions
  • Spirent TestCenter
    • Port Grouping (First Release 4.41)
    • LACP
    • LAG Emulation (BPK-1312A) 
    • Aggregated Ports
    • LAG modules
       
Answer
  • Activate Test Module Profile in Firmware Management 
  • PX3/DX3-QSFP-DD-8 appliances
    • 400G
      • STC-PortGroup-4x2-Port
      • STC-PortGroup-2x4-Port
      • STC-PortGroup-1x8-Port
  • PX3/DX3-400G-T2 and PX3/DX3-QSFP-DD-2 test modules
    • 100G
      • STC-PortGroup-1x2-Port
  • C1/C2/C50 Appliances (v5.28)
    • Added LAG support for NIC47 and NIC-65
  • FX3-QSFP28-6 test module (v5.08)
    • LAG support shown in 5.08 release notes.
      • Only 100G speed.
  • PX3-QSFP28-12 and PX3-100GQ-T12 (4.95)
    • 100G Routing mode: add LAG support
      • Current profiles available:
        • STC-PortGroup-2x6-Port
        • STC-PortGroup-1x12-Port
  • MX3/FX3-QSFP28-4 test module (v4.94)
    • Add 10G/25G/50G LAG support
  • MX3/FX3-QSFP28-4 test module (v4.93)
    • Add 40G/100G LAG support
  • MX3-100GQ-T2 and FX3-100GQ-T2 hardware modules. (v4.85)
    • 100G 1x2 port LAG profile (Supports 10G, 25G, 40G, 50G and 100G port speeds)
    • 50G 2x2 port LAG profile (Supports 10G and 25G port speeds.)
    • Supports 2-port LAG profile (Supports 40G and 100G port speeds.) (v4.84)
  • MX3-25GD-T2 and FX3-25GD-T2 hardware modules. (v4.85)
    • 25G 2x4 port LAG profile (Supports 10G and 25G port speeds)
  • MX2/FX2-1G-Sx (v4.75)
    • 1 x 16 - select STC-1G-PortGroup-1x16-Port
    • 2 x 4 - select STC-1G-PortGroup-2x4-Port
    • 4 x 4 - select STC-1G-PortGroup-4x4-Port (seems multiport is like this too)
    • 2 x 8 - select STC-1G-PortGroup-2x8-Port
    • 1 x 12 - select STC-1G-PortGroup-1x12-Port
    • 1 x 4 - select STC-1G-PortGroup-1x4-Port
    • 1 x 8 - select STC-1G-PortGroup-1x8-Port
  • MXP-10G-Sx (v4.75)
    • 4 x 2 - select STC-4x2-Port-LAG-Functional
    • 2 x 2 - select STC-2x2-Port-LAG-Functional
    • 1 x 4 - select STC-1x4-Port-LAG-Functional
    • 2 x 4 - select STC-2x4-Port-LAG-Functional
    • 1 x 8 - select STC-1x8-Port-LAG-Functional
  • MX2-10G-Sx (v4.59) 
    • 6 x 2 - select STC-Multiport
    • 3 x 4 - select STC-Multiport
    • 1 x 8 - select STC-10G/1G-PortGroup-1x8-Port
    • 1 x 12 - select STC-10G/1G-PortGroup-1x12-Port
  • FX2-10G-Sx (v4.59) 
    • 6 x 2 - select STC-Multiport
    • 3 x 4 - select STC-Multiport
    • 1 x 8 - select STC-10G/1G-PortGroup-1x8-Port
    • 1 x 12 - select STC-10G/1G-PortGroup-1x12-Port
    • 1 x 16 - select STC-10G/1G-PortGroup-1x16-Port (beta - CR: 2554409411)
  • MX-10G-C8, FX-10G-C8 (v4.57)
    • 2 x 2 -port 10G, select STC-2x2-port-LAG-Functional
    • 4 x 2 -port 10G, select STC-4x2-port-LAG-Functional
    • 1 x 4 -port 10G, select STC-1x4-port-LAG-Functional
    • 2 x 4 -port 10G, select STC-2x4-port-LAG-Functional
    • 1 x 8 -port 10G, select STC-1x8-port-LAG-Functional
  • STCa (v4.57)
    • 1 x 2
    • 1 x 4
    • 1 x 8
  • MX2-100GO-P4, FX2-100GO-P4 (v4.54)
    • 1 x 4 - select STC-100G-PortGroup-1x4-Port
    • 1 x 3 - select STC-100G-PortGroup-1x3-Port
    • 1 x 2 - select STC-100G-PortGroup-1x2-Port
    • 2 x 2 - select STC-100G-PortGroup-2x2-Port
  • MX2-10G-Qx, FX2-10G-Qx (v4.51, use the 40G profiles)
    • Same version supported as MX2-40G-Qx, FX2-40G-Qx
  • MX2-40G-Qx, FX2-40G-Qx - Prior to v4.49 10G only. v4.49 started supporting 40G but only on MX2.  
    • 10G - Up to 4 port per group, need to go to Tools->Firmware Mgt, select "Activate Test Module Profile", and select "STC-Multiport" Profile)
      • Up to 10 x 2-port
      • Up to 5 x 4-port
    • 10G - Greater than 4 port per group, need to go to Tools->Firmware Mgt, select "Activate Test Module Profile", and select one of the 40G PortGroups Profile)
      • 1 x 8-port (select STC-40G-PortGroup-1x2-Port)
      • 2 x 8-port (select STC-40G-PortGroup-2x2-Port)
      • 1 x 12-port (select STC-40G-PortGroup-1x3-Port)
      • 1 x 16-port (select STC-40G-PortGroup-1x4-Port)
      • 1 x 20-port (select STC-40G-PortGroup-1x5-Port)
    • 40G  - Need to go to Tools->Firmware Mgt, select "Activate Test Module Profile", and select the appropriate 40G Profile)
      • MX2-40G-Qx (v4.49), FX2-40G-Qx (4.51).
        • 1 x 2-ports
        • 2 x 2-ports
        • 1 x 3-ports
        • 1 x 4-ports (v4.51)
        • 1 x 5-ports (v4.51)
  • MX-10G-Sx (v4.41)
    • 2-port, 4-port, 8-port
    • Need to load Cloud Core Profile (Go to Tools->Firmware Mgt, select "Activate Test Module Profile", and select the New Profile)
  •  
  • CM-1G-Dx
    • 2 port
      • Up to 6 x 2-port LAG
  • MX/FX-100G-P2
    • 2 ports of 100G
  • MX/FX-100G-F2
    • 2 ports of 100G
    • 4 ports of 40G

Product : Switching,Spirent TestCenter,LACP