Customer Service Center

There are two different scenarios when you use this command on VR5-HD:

• VR5 emulator are used:
  • In this case, the path assigned to this command is the local path/address on the controller PC such as- C:\test.hde
  • When you load this file, use command LOAD C:\test.hde
• Controller PC connected to VR5:
  • In this case, the path assigned to this command should be the path on the embedded PC other than controller PC.
  • When you load this file, use command LOAD C:\test.hde (this path should be on embedded PC
  • Make sure before you issue this command to telnet party, the file is already reside under that path