Customer Service Center

• Spirent TestCenter
  • PPPoL2TP emulation
• Topology

         +-----------+                   +-----------+ 
         |  STC LAC  |   192.85.1.0\24   |  STC LNS  | 
         | and PPPoX +-------------------+ and PPPoX |
         |   client  | .3             .1 |   server  | 
         +-----------+                   +-----------+ 

Please refer to the above topology diagram and attached zip containing the configuration file and resultant pcaps.

To run the test

• After relocating the ports
• On the All Devices grid
  • select the "Server" device block and click the "Start Device" button
  • select the "Client" device block and click the "Start Device" button
• Click "Apply" (this will push the newly acquired addresses down to the FW)
• After the devices reach the "Connected" state go to "All Streamblocks"
  • select both device blocks, right click and select "ARP/ND" -> "Start ARP/ND"
  • after the "All attempted Arps resolved successfully" is logged, start traffic