Printer FriendlyEmail Article Link

Spirent TestCenter: How to configure BGP LU on Spirent TestCenter?

  • Spirent TestCenter
  • BGP LU (Labeled Unicast)
  • Open Spirent TestCenter Application.
  • Connect to a chassis and reserve the ports.
  • Configure your devices and enable BGP.
  • Make sure that the BGP session gets established between your devices.
  • Add some BGP routes to your configuration.
  • On Spirent TestCenter Application select All Devices at the left tree menu and Select the BGP tab and hit the Edit Routes button.
  • At the IPv4 Routes tab set the SubAFI as Labeled IP, enable the MPLS Label and add the labels at the Custom MPLS Labels fields.

  • Now you can configure stream blocks using the generated routes as source/destination.
  • If you start a capture and after that the traffic, you will see the MPLS labels you configured.

Product : Spirent TestCenter,MPLS,BGP