Customer Service Center
Home
Knowledge Base
Contact Support
License Activation
|
Contact Support
|
License Activation
|
Spirent KB Article
Doc ID: FAQ19533
Printer Friendly
Email Article Link
Spirent TestCenter: How can I configure IPv6 Destination Header?
Environment/Versions
Spirent TestCenter.
IPv6.
IPv6 Destination Header.
Answer
Open Spirent TestCenter Application, connect to a chassis and, reserve two ports.
Create 2 IPv6 emulated devices on Spirent Test Center Application.
Create 1 stream block; for this example, we’re going to use a unidirectional one.
At the
Frame
screen, go to the
Add Header
option at the left menu. Scroll down and, under
Category: IP
, you will find the
IPv6 Destination Header
option; highlight it and hit the OK button at the bottom.
Expand the IPv6 Destination Header menu, right-click at the IPv6 Options option, and select Insert Pad1 Option.
Expand the IPv6 Options and Pad 1 Options menus; at the Pad 1 Option textbox, you can set the value you want in decimal notation. You mentioned you want it to be 0xC9, so we should use 201.
The PCAP should show something like this:
Version
2.0
Publish Date
2021-02-11
Categories
Product : Spirent TestCenter,IPv6
Related Articles