Printer FriendlyEmail Article Link

Spirent TestCenter Virtual on OpenStack Quick Start Guide (5.38)

Summary

Document description: Procedures to guide the first-time user from installation through running a simple Layer 3 traffic test on OpenStack

Virtual Controller Setup: Refer to Spirent TestCenter™ Virtual Controller Set up Guide 
Installing Spirent TestCenter on OpenStack: Download the Spirent TestCenter Virtual QCOW2 image for OpenStack

  • OpenStack Management Network

  • Create internal networks 

  • Security Groups control which TCP/UDP ports are open to/from the VM

  • Required TCP/UDP Ports for the Management network

  • Create additional Flavors for optimal Spirent TestCenter Virtual performance

  • Flavors can only be created from the admin account

Launching/Configuring a Spirent TestCenter Virtual Machine Instance

  • Launch VMs/Instances from the Project ->Compute ->Instances view, using the Launch Instance button

  • Configure the Networks you will use in the Networking tab

  • Assign Floating IPs to Spirent TestCenter Virtual Admin Interfaces

  • Spirent TestCenter Virtual Admin Commands

Using Spirent TestCenter GUI for Spirent TestCenter Virtual Ports

  • Launch a compatible Spirent TestCenter GUI version
  • Add the chassis IP of the Spirent TestCenter Port VMs
  • Select the Spirent TestCenter Virtual ports and reserve them
Attachments
Attachment Description
Spirent TestCenter Virtual™ on OpenStack Quick Start Guide (5.38)

Product : STC Virtual,Installation/Setup,Quick Start/Ref