-upgrading firmware manual upgrade 1. Either telnet to the QSCOPE on port 7010 => telnet 10.32.89.95 7010 (login to QSOPE, port 7010, to issue TL1 commands) Trying... Connected to 10.32.89.95. Escape character is '^]'. COPYRIGHT 2009-2010 SPIRENT COMMUNICATIONS OF ROCKVILLE, INC., ALL RIGHTS RESERVED Host : STAC-6500-1 Firmware Rev : RA02.00.121 act-user::super:tilden::super; (Logs into the QSCOPE as SUPER) ed-attr-eqpt:::tilden::tmo=3000; (Change timeout to 50 minutes) ;rtrv-attr-eqpt:::tilden; OK 0 <OK 0 <IP TILDEN < STAC-6500-1 10-07-13 09:42:05 M TILDEN COMPLD "TMO=3000 SESSIONS=30" "TOTALCIR=2000 TOTALKFPS=1500000" "RESULTS_DUR=7" "MODEL=6500" upg-firmware:::ctag::RA02.00.GA:10.32.90.141:RFS_exports/QSCOPE/6500/6500-RA02.00.GA; 2. Or use the Download Firmware option in the GUI. You can also upgrade from Firmware Download GUI