Printer FriendlyEmail Article Link

STCLive Probe: Why isn't the probe completing the boot up? It pings to the management port but the 7010 TL1 port does not connect.

  • STCLive Probe 7500C series  (1G and 10G modules)
  • one possibility is that there is a problem with the serial connection on the 1G or 10G test module.  
  • a 'yelling' connection to the serial port (micro USB connection), can interfere with normal boot of the module
  • if a serial connection is present (cable connected to the micro USB), try removing it and booting the module again.


Product : VisionWorks Probe