Customer Service Center

Environment/Versions Spirent TestCenter BGP LU (Labeled Unicast) Answer Open Spirent TestCenter Application. Connect to a chassis and reserve the ports. Configure your devices and enable BGP. Make sure that the BGP session gets established between your devices. Add some BGP routes to your configuration. On Spirent TestCenter Application select All Devices at the left tree menu and Select the BGP tab and hit the Edit Routes button. At the IPv4 Routes tab set the SubAFI as Labeled IP, enable the MPLS Label and add the labels at the Custom MPLS Labels fields. Now you can configure stream blocks using the generated routes as source/destination. If you start a capture and after that the traffic, you will see the MPLS labels you configured. Attachments Attachment BGP LU B2B Sample.tcc