Printer FriendlyEmail Article Link

Spirent TestCenter: Ports 3 and 4 are not showing up in the Spirent TestCenter Application.

Environment/Versions
  • Spirent TestCenter.
  • STC-AdvTSN Performance mode.
Answer
If the STC-AdvTSN Mode is enabled, Spirent TestCenter will only display ports 1 and 2.
To be able to use ports 3 and 4 you should switch back to Default Mode.
  • On the left side of the Sprient TestCenter Application select the port.
  • Select the General tab and select STC-Default Mode on the drop-down list under Performance Mode.
  • HIt the Apply button.

Product : Spirent TestCenter