Customer Service Center
Home
Knowledge Base
Contact Support
License Activation
|
Contact Support
|
License Activation
|
Spirent KB Article
Doc ID: FAQ18003
Printer Friendly
Email Article Link
Lumos (STCLive) Probe: What is the part number of the asynchronous RS-232 cables used between the 7521, 7531, 7541, 7561 probes and laptop?
Environment/Versions
Lumos 7502, 7521, 7531, 7541, 7561 Probes - all versions.
Answer
For a 7521, 7531, or 7541 module:
If your PC has a 9-pin serial port connection, use the
04-002959
micro-USB to DB9F cable for a direct connection.
If your PC has no 9-pin serial port, use the
04-002959
micro-USB to DB9F cable connected to the
04-003155
DB9M to USB adapter cable to allow connection to a USB port.
For a 7561 module:
For a USB connection, use the
04-003744
micro-DB9F to USB cable to any USB port on the PC.
For a 9-pin serial port connection, use the
04-003610
micro-DB9F to DB9M cable and a DB9F to DB9F adapter.
NOTE
: As of 3/2018:
04-003744
is in active / production status so it can be ordered from Spirent using "
6941C-75MDB9
"
04-003610
is in inactive status and we have none in stock and no upper level part numbers for customers to order.
04-003155
is in production status and the order number (for customers) is “
6941C-75USB
”
04-002959
is still in production status but we have switched to
04-003596
(same cable just an extended micro USB tip) which is the cable shipped with the units. The order number (for customers) would be “
6941C-75ASYNC
”
Version
4.0
Publish Date
2018-03-21
Categories
Product : VisionWorks Probe
Related Articles