Printer FriendlyEmail Article Link

Why am I getting excessive errors when run test to any access point on DTAU?

Answer

Check the following:

To the DTAU:  Check for 4*5 TBM cards by issuing DTBM. 
If all TBM cards are 4*5, verify GAIN is ON by issuing: DAMP.
If GAIN is OFF.  Issue: SAMP ON.


In DRTU/BRTU verify or change the TAP TYPE to DTAU2 by issuing ED-DB-TAP::<tapid>:CTAG::TYPE=DTAU2;


Product : TDM & Analog Test