The e2010 must be in mode 5 in order to run RF properly. The following are the steps to do this:
1. On the e2010 screen, navigate to the C:\AT4Wireless\LTE_E2010\SW_LTE_SU_R1_2_2_2_2\etc\E2010Customization folder.
2. Double click on setPropertyRCT.bat, and reboot the unit.
3. On e2010, launch the Putty program and select PGG-A, and load it. The logging Putty GUI will show up.
4. In the Putty GUI, check to verify that mode 5 is set. The unit is now ready for LTE RF testing.