Printer FriendlyEmail Article Link

How do I enable multiple Default Bearers per UE or subscriber in MME Nodal or SGW Nodal on Landslide?

Answer

 

    1. Open the MME Nodal or SGW Nodal test case, select the Test Configuration tab, in the Mobile Subscribers pane, click on the Default Bearers per Session pull down and configure at least 2 Default Bearers. The PDN Connect Delay (s) previously greyed out will then be available for configuration with a default of 0 seconds.
    2. Configure the PDN Connect Delay with at least 1 second for the multiple Default Bearer configuration made above to perform as expected.

    3. Complete the rest of the test parameters configuration such as the Network Devices as well as the remaining Control and Data Plane parameters if applicable prior to running the test session.

Attachments

Product : LTE,Landslide Client,Landslide,S11,S1