Printer FriendlyEmail Article Link

My GSS6700 did not respond as expected when using the GET command


The GET command can be used to retrieve information about a piece of connected hardware. The command can only be used with a GSS6700, the command will retieve information about multiple simulators if connected. The command can be used in the following way: 

1.         The command will not work if only the SimReplay software had been opened and no scenario file had been selected and opened.
2.         The command is not dependant on the licence file but does need the Sig Gen txt file to be present in the PosApp directory.
3.         The command will work once the scenario file had been loaded. The command workes before the scenario is running, and during the scenario running.
4.         The command continues to work if the scenario file is closed, but SimReplay is still open.


Response <serial_number>,<capability[:capability..]>[,<serial_number>,<capability..>]

Example Query all 6700 signal generators connected to the PosApp Controller

Product : GNSS,SimREPLAYplus,SimREPLAY,SimGEN,PosApp,GSS6700