Customer Service Center
Spirent KB Article
Doc ID: FAQ12292
Email Article Link
Why can't I connect to the Spirent TestCenter when running on a layer 2 network with no gateway defined ?
runs on a Fedora 15 kernel and requires a gateway to route out the test equipment due to the
layer 3 stack
being enabled. It will not route out the admin port otherwise without a
If you are going to run it from
laptop to C1
, then put the
static ip address of the laptop
into the gateway address on the
. Add another ip address that is in the subnet of the pc on the C1, set the net mask .
Once completed issue a activate and reboot commands in this order.
Once the system comes up you should be able to connect to the C1 via the application on the laptop.
Product : Spirent TestCenter,Avalanche,Spirent TestCenter