Printer FriendlyEmail Article Link

GSS9000, C50r Controller: What FPGA versions should I install with my PosApp update?

Environment/Versions
  • GSS9000 simulator
  • C50r Host Controller
  • PosApp update
  • FPGA update
Answer
  • Consult the table below to see the 'Spirent recommended' software/FPGA packages
  • Any combination not covered in the table below can be considered 'untested' by Spirent
    • Untested combinations may not work as intended
    • If you experience difficulties after updating to a combination not covered in the table, update PosApp/FPGA to a known tested 'package' before contacting Global Services at support@spirent.com
  • From PosApp v6.04, ensure the correct Signal Generator FPGA image for the "Module ID Type" is selected before updating. The Module ID can be found in the FPGA Image Loader
 

 

Internal Reference PosApp Version Release Type
FPGA Version
 

SIGNAL GENERATOR - ID-S24
 		 UPCONVERTER TIMER CALIBRATOR
GNSS GTx FLEX IQ
OPS_B58 8.00 General 27.05 26.05 19.06 29.08 9.05 14.01 5.01
OPS_B48 7.04 General 27.05 26.05 19.06 29.08 8.01 14.01 5.01
OPS_B43 7.03 General 27.05 26.05 19.06 23.42 6.02 14.01 5.01
OPS_B39 7.02 General 17.06 18.45 19.06 23.42 6.02 8.00 5.01
OPS_B37 7.01 General 17.06 18.45 19.06 - 6.02 8.00 5.01
OPS_B35 7.00 SR01 General 17.06 18.45 19.06 - 6.02 8.00 5.01
OPS_B33 6.07 General 17.06 18.45 - - 6.02 8.00 5.01
OPS_B30 6.06 General 17.06 18.45 - - 6.02 8.00 5.01
OPS_B25 6.05 General 17.06 18.45 - - 6.02 8.00 5.01
GS_B25 6.04 General 17.06 - - - 6.02 8.00 5.01


 

Internal Reference

PosApp Version

Release Type

FPGA Version

SIGNAL GENERATOR - ID-S04

UPCONVERTER

TIMER

CALIBRATOR
GNSS GTx FLEX IQ
OPS_B58 8.00 General 15.02 16.00 - - 9.05 14.01 5.01
OPS_B48 7.04 General 15.02 16.00 - - 8.01 14.01 5.01
OPS_B43 7.03 General 15.02 16.00 - - 6.02 14.01 5.01
OPS_B39 7.02 General 15.02 16.00 - - 6.02 8.00 5.01
OPS_B37 7.01 General 15.02 16.00 - - 6.02 8.00 5.01
OPS_B35 7.00 SR01 General 15.02 16.00 - - 6.02 8.00 5.01
OPS_B33 6.07 General 15.02 16.00 - - 6.02 8.00 5.01
OPS_B30 6.06 General 15.02 16.00 - - 6.02 8.00 5.01
OPS_B25 6.05 General 15.02 16.00 - - 6.02 8.00 5.01
OPS_B21 6.04 General 15.02 16.00 - - 6.02 8.00 5.01
GS_B23 6.03 SR01 Controlled 15.02 16.00 - - 6.02 8.00 5.01
B15 6.03 General 15.02 16.00 - - 6.02 8.00 5.01
GS_B12 6.02 SR01 Controlled 15.02 6.09 - - 6.02 8.00 5.01
GS_A01 6.01 Controlled 8.05 6.09 - - 6.02 8.00 5.01
B01 5.07 General 8.05 6.09 - - 6.02 8.00 5.01
N/A 5.06 SR01 Controlled 5.06 - - - 6.02 3.24 5.01
A53 5.06 General 5.06 - - - 6.02 3.24 5.01

A49

5.05 SR01

General

 5.06 - - -

5.01

3.24

5.01

A48

5.05

Controlled

 5.06 - - -

5.01

3.24

5.01
N/A 5.04 SR02 Controlled 5.06 - - - 5.01 3.24 5.01

A44

5.03 SR01

General

 4.06 - - -

3.02

3.24

5.01

A40

5.02 SR03

Controlled

 2.33 - - -

2.03

2.08

2.03

A36

5.02 SR01

Controlled

 2.33 - - -

2.03

2.08

2.03
 
  • Contact Global Services if you require package information about a PosApp version which is not listed in the table above
  • For further information about checking or updating FPGA image versions, read article FAQ16924 - How can I check/update the FPGA image versions of my GSS9000 simulator?

Product : GSS9000_SERIES,PosApp