Customer Service Center
Spirent KB Article
Doc ID: FAQ19298
Email Article Link
Spirent TestCenter: How can I configure Inclusive Multicas Route (IMR) a.k.a Type 3 EVPN routes on Spirent TestCenter?
IRM (Type-3) EVPN routes.
Open Spirent TestCener Application and add the emulated devices you will use for the configuration.
Go to Wizards > Wizards…
Type vxlan on the Filter text box, and select the VXLAN option.
At the Configure VXLAN Ports screen, enable the port in which the VTEP is going to be configured, and configure it to match your testbed.
At the Configure VTEP screen, you will configure how many VTEPs your test will have per VLAN.
After that, at the Configure Segments screen, you will be able to configure the VTEPs, (Segments, VNIs,); you can also add L3 VNIs.
At the Configure VM Devices, you will add the VMs set up. Spirent TestCenter is going to simulate these devices.
At the Configure Learning Mode, you can select between Unicast, Multicast, or EVPN Overlay. As per my understanding, EVPN Overlay is the option that will match your testbed.
If you select the EVPN Overlay option, the wizard will enable the Configure EVPN Routes, where you allow Inclusive Multicast Routes.
Product : Spirent TestCenter,BGP,VXLAN