Printer FriendlyEmail Article Link

Spirent TestCenter: How to reseat a chassis controller?

  • Chassis controller
  • N4U
  • N11U

enlightened IMPORTANT: This task should be done with the right ESD precautions. It doesn't take a day with noticeable static in the air to weaken of fry components


  • ​N4U

    • ​​You can NOT reseat the N4U Controller. the controller is not exposed.


  • N11U

    1. ​​​​Power down the chassis (The controller is NOT "hotswapable")
    2. Locate the controller on the back side of the N11U chassis
  1. Unscrew the 2 thumbscrews on each side of the controller
  1. Pull the controller out a bit, and then put it back in place
  2. Screw the 2 thumbscrews on each side of the controller again.


Product : Spirent TestCenter,Chassis,Chassis,Hardware