Printer FriendlyEmail Article Link

Spirent TestCenter Convergence Test Demonstration using Rapid Spanning Tree Protocol (RSTP)

Summary

This Video Demonstration is a narrated screencam showing how to set up a Rapid Spanning Tree Protocol (RSTP) Convergence Test. It will create RSTP Devices on Ports 1 & 2 to emulate a single RSTP bridge. It will set up traffic to be sent upstream to these ports from Port 3. It will also use the Command Sequencer to automate running the test. It will also use the Dynamic Results View (DRV) to display the Convergence results.

Course: Spirent TestCenter Continuing Education course
Series: Essentials of Courses

Run Time: 23 min
 

Content

Select the Video Play Button below:

Attachments
Attachment Description
These are the slides that were used for the demonstration

Attachment Description
This is the Spirent TestCenter configuration file that was used for the demonstration (select "no" to automatically connect and reserve the ports, then right-click on a port to relocate all three to your chassis)

Product : Spirent TestCenter,Switching,Spirent TestCenter,STP,RSTP