Customer Service Center
Home
Knowledge Base
Contact Support
License Activation
|
Contact Support
|
License Activation
|
Spirent KB Article
Doc ID: DOC11360
Printer Friendly
Email Article Link
Spirent TestCenter Release Notes (4.91)
Summary
This release notes document is for the latest Spirent TestCenter software base packages, test packages, and hardware. Click the attached PDF to open the release notes.
The following is a partial list of new content that is being introduced as part of this release.
Hardware
PX3-QSFP28-12-100A, PX3-QSFP28-12-125A, PX3-QSFP28-12-150A, PX3-QSFP28-12-175A, PX3-QSFP28-12-225A Test Modules support 100G,50G,40G,25G and 10GbE
PX3-400GQ-P2, 2-port CFP8 Test Module and PX3-400GQ-T2, 2-port QSFP-DD Test Modules support 4x100GbE on Spirent TestCenter and Boost UI
DX3-400GQ-T2, DX3-400GD-T2, 2-port QSFP-DD Test Modules and DX3-400GQ-P2, DX3-400GD-P2, 2-port CFP8 Test Modules support 4x100GbE on Spirent TestCenter and Boost UI
PX3-100G 12-port Modules (100/50/25/40/10G) Version B supports 50G FEC Counters
FX2-10G-S16, FX2-10G-12, FX2-10G-S8, MX2-10G-S12, MX2-10G-S8, MX2-10G-S4, and NIC-47 Test Modules fully support transmit, receive, and analysis for Preemption standard (IEEE802.1Qbu) in 10GbE mode
Spirent C50 appliance 8-Port FX2 10/100/1000 Ethernet SFP NIC and Hardware Timing
Software
PX3-400GQ-P2, 2-port CFP8 Test Module, PX3-400GQ-T2, 2-port QSFP-DD Test Module, DX3-400GQ-T2, DX3-400GD-T2, DX3-400GDF-T2, 2-port QSFP-DD Test Module, DX3-400GQ-P2, DX3-400GD-P2, DX3-400GDF-P2 2-port CFP8 Test Module now include:
Priority Flow Control support for 50G individual counters
Increase PX3 50G RIT from 8k to 16k.
Enable Shuffle VFD support for 100G and 50G (PX3 and DX3).
Enable Smooth Random Length feature for 100G and 50G PX3
Support for control plane PFC on PX3 50G; also 8 PFC queue for PX3 and DX3 50G
TSN: 802.1 Qbv – Supports the generation of timed traffic based on gPTP time and Time Aware Shaping parameters
IEEE 1588 supports displaying and logging the four timestamps (t1-t4) from the PTP Clock Sync messaging sequence
Supports eCPRI (Evolved Common Public Radio Interface) PDU template and auto response framework
VXLAN transporting VM BUM (broadcast, unknown unicast, and multicast) traffic using PIM-ASM underlay
New one-click option to optimize test configurations for long-running tests
The currently running configuration is now included in crash and diagnostic reports (.tcc file)
HLTAPI Enhancements
interface_config command enhanced to support FEC option for 25G and 50G
traffic_stats command enhanced so the streamblock name cay be used to get results for that streamblock
get_handles command enhanced to support all object types
Segment Routing:
Supports the
ISIS SRv6 latest draft version draft-bashandy-isis-srv6-extensions-04; adds support for SRMSD Sub-tlv
ISIS SR View Routes - supports viewing IS-IS SR capabilities, LSP information, interface ip, and related TLVs
ISIS SR Flex Algorithm - includes a new capability, “SR-FAD Sub-TLV,” added to Capability TLV tab
New SRv6 L3VPN Wizard
BGP:
Support for IPv4 Flow Spec Types 7, 8, 9, and 12
Supports BGP add-path capability for unicast and VPN routes
BGP device in dual stack mode: choose how to advertise/withdrawn routes
Supports SRv6 over EVPN route types 1, 2, 3
,
and 5
Attachments
Attachment
Spirent TestCenter Software and Hardware Release Notes_4.91.pdf
Attachment Description
Spirent TestCenter Release Notes (4.91)
Version
4.0
Publish Date
2019-11-07
Categories
Product : Spirent TestCenter,Spirent TestCenter
Related Articles