1. From the GUI menu, go to View/System Information.
2. Select or highlight the System Controller/IP, for which you wish to change the IP address for, then click on 'Configure_SC'.
3. Follow the prompts, to proceed through the steps in changing the password.
** An alternative method of changing the IP address info for the unit (A50, A100) or controller card is to directly connect to the unit/card via a serial cable (to the COM1 port @ terminal setting of 115Kbps/8/1).
Thereafter, power-reset the unit; MAKE SURE to hit any key during the boot-up to interrupt the process so that you get the menu prompt to allow for the changes.