Customer Service Center

• Avalanche
• TclAPI

• We could use the below API to change the load during the test run,

av::perform ChangeLoad system1 -unitAddress <ChassisIP>:<UnitNumber>:<Index> -loadChange <value>
   
        LoadChange value should be of the form +10, =10, -10
       
 Ex: av::perform ChangeLoad system1 -unitAddress 10.10.10.10:0:0 -loadChange +10 -stcIpAddress 10.10.10.10:1,1
  

Note: 

•          -stcIpAddress part is not required for legacy appliance such as 3100B and C100-U.
•          The diffuclt part is figuring out the “unitAddress”.
•          See the Avalanche Automation Programmers' Reference for information on mapping a port number to <UnitNumber>.
•          For the <Index> it should be starting from 1 for User Based Load, For global load, <Index> is 0.
  
  
   
• Example of UnitNumber mapping in C100-S3 8x10G functional mode

PortGroup1
=========
for port1 = 0,1,2
for port2 = 3,4,5
 
PortGroup3
=========
for port3 = 0,1,2
for port4 = 3,4,5
 
PortGroup5
=========
for port5 = 0,1,2
for port6 = 3,4,5
 
PortGroup7
=========
for port7 = 0,1,2
for port8 = 3,4,5