Can I generate a ping command out of the test ports?
You can use the Action list to generate ICMP ping commands out of the test ports using the following syntax: ICMP://address:port ECHO LENGTH=datalength TIMEOUT=timeoutvalue •address: The address of the destination in IPv4 format. •port (optional): The destination port. •datalength: The length of the data in the ping command; valid range is 0-1472. •timeoutvalue (optional): The amount of time (in milliseconds) to wait for a response message, before failing the action; valid range is 300-4000. If omitted, the default value is 1000. Examples: ICMP://192.168.1.1 ECHO LENGTH=1000 ICMP://192.168.10.1 ECHO LENGTH=64 TIMEOUT=3000 There are no statistics generated for this feature.