Printer FriendlyEmail Article Link

Spirent TestCenter: How should I configure the Spirent TestCenter Application to achieve the correct Rx Download traffic rate using 3 or more ports?

  • Spirent TestCenter.
  • 802.11(ax)
  • Ethernet
  • You will need at least 3 different Ethernet ports.  Create an emulated device on each port.
  • Configure 3 different download stream blocks (Eth --> WiFi).  One for each emulated device.
  • Adjust the WiFi attenuation to be around -40 to -45 dB.
  • Validate the channel Width is 160 MHz.
  • On the stream settings, set the ToS to 0x00.

Product : WiFi,Spirent TestCenter