Printer FriendlyEmail Article Link

Spirent TestCenter: How to configure StreamBlock to accept PFC frames from DUT and decrease the load?

  1. Verify the class being sent in the PFC packets from the DUT (you can capture the traffic to check)
  2. Enable "Flown Control" in the port [Select port, go to "Advanced" tab]
  3. Enable the priorities for PFC
  4. Go to the StreamBlocks view and scroll right up to the end (port need to be online for column to appear), enable "Enable Custom PFC" and select the "Custom PFC Priority" seen in the captures from the DUTs PFC packets

Product : Spirent TestCenter